---
title: "Project Шайба"
author: "Blagovest Petrov"
date: 2023-01-12T09:34:51+03:00
tags:
- "DIY"
- "Vintage Hardware"
categories:
- "Travel"
draft: false
---
{{< youtube id="21tYPqg4334" >}}
# Update
So, [here](https://code.petrovs.info/blago/project_shaiba/src/branch/master/rotary_keyboard.ino) is the code. It's really simple gadget. The whole setup took me less than a hour for building and coding.
I got the rotary dialer from a local auction site, like Ebay. My first idea was to include everything inside it's box and leave only the USB cable outside but it was encapsulated and I didn't have any success for opening it. Originally, the cable had 5 pin DIN connector but only three pins were connected ( White, Brown and Green):
* `Green`: Ground `⏚`
* `Brown`: Impulse pin. It's used for counting the impulses. Tje pin outputs `1` on equal intervals.
* `White`: It's always `UP` if the encoder is rotating. I didn't use this one because the `millis()` is enough counting the time. It may overflow after some time, but I'm thinking about this in the time of writing this post :)
The board that I used it [OLIMEXINO-85-ASM](https://www.olimex.com/Products/Duino/AVR/OLIMEXINO-85-ASM/open-source-hardware). I got a bunch unsoldered some time ago. It's clone of the Digispark board with ATtiny85 controller. A really cheap board with software implementation of USB :)) `DigiKeyboard.h`.
The `Brown` pin is connected to Pin 2 of the board, as it's shown in Instructables.
TODO: Removing the USB-B port and wiring USB-A cable directly to the PCB; Possible case for the board.
Update2: It's even funnier using it with a mobile phone. Works perfect with USB-C to A converter.
Update2: This is a similar project from 2015:
{{< youtube id="_DI2a2eZEac" >}}